Ubiquiti Networks LiteStation2 Guide de l'utilisateur télécharger pdf (Page 4)

Quick Setup Guide

This Quick Setup Guide will guide you through quick and easy configuration of the

subscriber station (client bridge) including:

 Changing of the IP settings (static or dynamic),

 Defining the SSID to which the subscriber station will be associated,

 Defining the IEEE 802.11 mode,

 Defining the wireless security (None, WEP, WPA™ or WPA2™),

 Changing the administrator’s password.

For detailed setup and configuration instructions, please refer to the chapter

Configuration Guide.

Follow these steps for subscriber station quick setup via web-browser interface:

Step 1 Login to the web management

Open the web browser and type the default IP address of the

PowerStation2/LiteStation2/LiteStation5 device http://192.168.1.20/ into the browser

address field. You will be prompted to enter the administrator login credentials:

User Name: ubnt

Password: ubnt

After successful administrator log on you will see the main page of the subscriber station

web management interface.

Step 2 Configure network settings

The IP configuration as described below is required for

PowerStation2/LiteStation2/LiteStation5 management purposes. IP addresses can either

be retrieved from a DHCP server or configured manually.

Use the Network menu to configure the IP settings:

Network Mode: specify the Bridge operating mode (selected by default). Router

operating mode configuration is described in the chapter Configuration Guide.

1 2 3 4 5 6 7 8 9 ... 25 26

Pas de commentaire

Ubiquiti Networks LiteStation2 Guide de l'utilisateur Page 4