Ubiquiti Networks airFiber Guide de l'utilisateur télécharger pdf (Page 12)

Chapter 1: InstallationairFiber

AF-5X User Guide

Ubiquiti Networks, Inc.

4. Connect an Ethernet cable from your network to the

Ethernet port labeled LAN on the airFiber PoE Adapter.

5. Connect the Power Cord to the power port on the

airFiber PoE Adapter. Connect the other end of the

Power Cord to a power source.

Mount the PoE Adapter (Optional)

1. Remove the Mounting Bracket from the adapter by

sliding the bracket downward.

2. Place the Mounting Bracket at the desired location and

mark the holes for the fasteners. Pre‑drill the holes if

necessary, then secure the bracket to wall using two

fasteners (not included).

3. Attach the airFiber PoE Adapter to the bracket by

aligning the four slots and tabs, and then slide the

adapter downward.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 49 50

Pas de commentaire

Ubiquiti Networks airFiber Guide de l'utilisateur Page 12