Ubiquiti Networks AF-5 Spécifications télécharger pdf (Page 9)

Installation Overview

We recommend that you configure your paired airFiber radios

before mounting. Below is an overview of the installation with

specific details in the following instructions:

• Connect Power over Ethernet to the Data port, and

connect an Ethernet cable between your computer and the

Managementport.

• Configure the device settings in the airFiber Configuration

Interface.

• Once configuration is complete, disconnect the cables to move

the airFiber radios.

• Pre-assemble the mounting hardware.

• Install the airFiber radios at the site.

• Establish and optimize the RF link.

Note: The AF-5 and AF-5U models share the same

installation and configuration instructions.

Connecting Power over Ethernet

1. Push the button and slide the port cover down to access

cableports. (The port cover cannot be completely removed.)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

Pas de commentaire

Ubiquiti Networks AF-5 Spécifications Page 9