5 GHz 2x2 MIMO BaseStation Sector AntennaModel: AM-5G20-90
SpecificationsAM-5G20-90Dimensions 700 x 135 x 70 mmWeight 5.9 kg (Mount Included)Frequency 5.15 - 5.85 GHzGain 19.4 - 20.3 dBiHPOL Beamwidth 91° (6 d
Safety Notices1. Read, follow, and keep these instructions.2. Heed all warnings.3. Only use attachments/accessories specified by the manufacturer.W
Limited WarrantyUBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from de
ReturnsNo Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS d
Limitation of LiabilityEXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE
ComplianceRF Exposure WarningThe antenna and transmitter must be installed to provide a separation distance from all persons and must not be located o
RoHS/WEEE Compliance StatementEnglishEuropean Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging
EspañolLa Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junt
Declaration of ConformityČesky [Czech]UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal
Italiano [Italian]Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NETWORKS device, è conforme ai requisiti essenziali ed alle altre dis
IntroductionThank you for purchasing the Ubiquiti Networks™ airMAX™ 5GHz 2x2 MIMO BaseStation Sector Antenna. This Quick Start Guide is designed to g
J060513—720-00031-01www.ubnt.com© 2012-2013 Ubiquiti Networks, Inc. All rights reserved.
Installation Requirements• RocketM5 or RocketM5 GPS (sold separately)• 12 mm and 13 mm wrenches• Shielded Category 5 (or above) cabling should be u
Hardware Installation1. Attach the RF Cables to the connectors labeled Chain 0 and Chain 1 on the RocketM.2. Attach the RocketM to the Rocket Mount
3. Connect the other ends of the RF Cables to the RF Connectors on the antenna. 4. Slide the Protective Shroud down over the RocketM until it locks
5. Attach the U-Brackets to the antenna:a. Secure the Slotted U-Bracket to the upper Mounting Lugs of the antenna using two Serrated Flange Nuts.b.
6. Insert two Carriage Bolts into each Pole Bracket.7. Attach each Pole Bracket to each U-Bracket using two Serrated Flange Bolts. Hand-tighten only
8. To mount the antenna to the pole, slide a Pole Clamp over each pair of Carriage Bolts. Secure each Pole Clamp with two Serrated FlangeNuts.Note:
9. The antenna has an electrical downtilt of 2°. To further adjust the elevation angle:a. Loosen the four Serrated Flange Bolts on the U-Brackets an
Commentaires sur ces manuels