Ubiquiti Networks airGateway Spécifications

Indoor Access Point with External AntennaModel: airGateway-LR

5. Attach the airGateway and PoE Adapter assembly to the Wall Mount Bracket:a. Insert the two Mounting Tabs on the airGateway into the slots located

Connecting via Wi-FiTo configure the airGateway, you must access it via Wi-Fi from a computer. 1. Connect to the wireless network (SSID) named www.ub

4. Change the default airGateway administrator password. Enter a new password in the New Password and Verify Password fields and click Next.5. Enter

6. Verify your settings and click Finish or click Previous to change the settings.The airGateway is ready to use. Connect wireless clients as describ

SpecificationsairGateway-LRDimensions airGateway: 54 x 44 x 30 mm Mount: 154 x 49 x 39 mmWeight 83 g (with mount)Networking Interface (2) 10/100 Ether

Safety Notices1. Read, follow, and keep these instructions.2. Heed all warnings.3. Only use attachments/accessories specified by the manufacturer.W

Limited WarrantyUBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from de

DisclaimerEXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE

NoteSome countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You

Industry CanadaThis Class A digital apparatus complies with Canadian ICES-003.To reduce potential radio interference to other users, the antenna type

IntroductionThank you for purchasing the Ubiquiti Networks™ airGateway™. This Quick Start Guide is designed to guide you through the installation, and

Australia and New ZealandWarning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the use

EspañolLa Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junt

Declaration of ConformityČesky [Czech]UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal

Italiano [Italian]Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NETWORKS device, è conforme ai requisiti essenziali ed alle altre dis

www.ubnt.com©2013 Ubiquiti Networks, Inc. All rights reserved. airGateway™, airMAX®, Ubiquiti Networks™, and the Ubiquiti logo® are trademarks or regi

Hardware OverviewTopPOE LANRJ45 Connector (Male)LEDPoE PortLAN PortAntenna ConnectorLEDSteady White Indicates bootup/initializition/power-on.Steady B

BottomMounting TabsResetReset ExtReset Resets the airGateway to factory defaults. To reset the airGateway, press and hold the Reset button for more t

Installation RequirementsThe airGateway is powered by and integrates exclusively with Ubiquiti Networks PoE adapters. A wall mount kit is included.•

*720-00066-01*720-00066-012. Insert the male RJ45 Connector of the airGateway into the Ethernet port labeled POE on the PoEAdapter. Push the two uni

4. Connect the Ethernet cable that was disconnected from the LAN port in step 1 to the LAN port on the airGateway.POELANPOELAN5. Connect the External

Wall Mounting1. Position the Wall Mount Bracket at the desired location on the wall with the bubble level at the bottom. Use the bubble level to ensu

3. Drill the holes in the wall using a 6 mm drill bit.4. Insert a Screw Anchor into each hole. Secure the Wall Mount Bracket to the wall by insertin