Ubiquiti Networks UAP-AC-3 Guide de l'utilisateur télécharger pdf (Page 39)

Chapter 9: Access Point DetailsUniFi

Controller User Guide

Ubiquiti Networks, Inc.

Configuration

Change device configuration settings. Click the Apply

button to save changes.

Config

Alias Enter or edit the name of the device.

Apply Click Apply to save your change.

Radio(s)

Radio (11n/b/g) or Radio (11n/a)

Channel Select a channel or keep the default setting,

Auto. You can also use the default HT20 for 20 MHz

operation or HT40 for 40 MHz operation.

Note: If the AP is part of a Zero Handoff WLAN

Group, the Channel setting is chosen for you (“Zero

Handoff” on page 9) and cannot be changed.

Tx Power By default the transmit power is set to Auto. You

can also manually select High, Medium, Low, or Custom.

• High The highest TX power available.

• Low The lowest TX power available.

• Medium Halfway between High and Low.

• Custom Custom setting that you specify.

If the AP is using an external antenna, the Antenna Gain

field will appear, allowing you to specify the gain of the

attached antenna. After applying the settings, go to

Transmit Power under Details > Radio, which always

shows EIRP, and place the mouse over it to display how

it’s calculated.

Apply Click Apply to save changes.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 56 57

Pas de commentaire

Ubiquiti Networks UAP-AC-3 Guide de l'utilisateur Page 39